3.418 86.82 .470 11.94 .295 max. panel 7.49 .177 4.50 9/16"[14.29] across flats 11/16"[17.46] across flats mark: kings 7763-400-F1103P 1.063 27.00 across flats 1.220 31.00 catalog p/n:7763-400-F1103P 6. optical: wavelength: 1250nm - 1625nm insertion loss: 0.3db typical, 0.5db max return loss: > -45db, -50db typical 7. replacement kits: contact kit: 7760-000-00702z 8. cable preparation and stripping procedure: cap-tbd. 9. red ldpe dust cap included (not shown) 10. crimp tooling: for factory application use hand tool kth-1000 and die kth-2035 for field application use hand tool kth-5000 and die kth-5018 11. electrical and optical contacts included notes: unless otherwise specified 1. interface compliant to smpte 304 specification. 2. material specifications: contacts: copper alloy o-rings and strain relief: silicone rubber all plastic parts: 20% glass filled polypropylene all other metal parts: 303 stainless steel per astm a582 3. finish specifications: stainless steel parts: passivate contacts: .000100 min gold per astm b488 over .000080 min nickel per ams-qqn-290 (rohs) 4. electrical specifications: low voltage contacts: 42 - 60 vac, 1 amp aux electrical contacts: 600 vac, 10 amp 5. environmental: operating temperature rating: -40c to 75c non-operating/storage temperture rating: -40c to 85c humidity: <95 rh (at 40c) .953 +0.004 -0.000 [ ] 24.2 +0.1 -0.0 ] +0.1 -0.0 [ 22.6 +0.004 -0.000 .890 mounting hole a tri lock smpte panel mount dd xxx drk 01/26/11 by date appd preliminary per er30232 description 01 rev 02/01/11 jcf date approved xx/xx/xx xxx date approved 02/01/11 psm date approved 01/26/11 drk date drawn customer sales drawing .xxx [x.xx] sht rev of 1 1 sd7763-400-F1103P winchester electronics corporation 62 barnes industrial road north wallingford, connecticut 06492 third angle dmf029 b decimal: .xx [x.x] .xxxx [x.xxx] angles: per asme y14.5m-1994 unless otherwise specified: dimensions are in inches [mm] tolerances: scale: .01 [0.3] .xxxx 2 1:1 .005 [0.13] 01 nut, jack, cable
|